Inspection
Demonstrably leak-tight structures
Inspection Flexistores
A flexistore is a collection buffer made of plastic oil, for example of polyester-reinforced polyvinylcholoride (PVC) or of polyester-reinforced polypropylene film (PP film). Flexistores are used, among other things, for the temporary collection of various (environmentally harmful) liquids. Normec provides an inspection on various parts on request.
Why Normec?
Rely on years of experience and expertise.
Schedule inspections, tests and training flexibly.
From testing to certification; you are 100% taken care of.
Normec is your expert partner with an active involvement in standardisation.
Parts inspection Flexistores
QS inspectors can inspect a flexistore, before it is actually put into use, on the following points:
the film to be used
the welding work in the factory (whether or not in the Netherlands)
the leak tightness of the welds
the installation of the flexistore on location.
Jet fuel bladders
Normec QS has specific experience in inspecting jet fuel bladders based on the internationally recognized standard MIL-PRF-32233. The findings of the inspectors are recorded in a report for the client, which is provided with a declaration of conformity.
Support with selection of Flexistores by Normec QS
Finding a suitable supplier for one or more Flexistores can be quite a job. Normec QS can support this. Our inspectors then make company visits to potential suppliers and carry out a quality audit on site. On the basis of the reports, the client can then make a choice. If necessary, an additional purchase check can be done at the factory at the finally chosen supplier.
Curious what we can do for your company?
These services might also be of interest to you.
Microscopic examination
OIT measurements
Shear test geosynthetics
Leading companies in this service
Normec QS
Bennekom Netherlands