Inspection
Secure water and gas networks. Before, during and after operations.
NTA 8828 Electro fusion welding of PE pipes and PE fittings
During the manufacture of electrofusion welding in a PE piping system (also known as PE welding), the quality of the welding connection is crucial. That quality is guaranteed with the NTA 8828 standard. NTA stands for Dutch Technical Agreement. This standard sets requirements for the delivery of high-quality electrofusion weld connections between PE pipes or PE fittings with built-in electrical resistance wire.
Why Normec?
Rely on years of experience and expertise.
Schedule inspections, tests and training flexibly.
From testing to certification; you are 100% taken care of.
Normec is your expert partner with an active involvement in standardisation.
Guidelines
Of course, Normec QS works according to the latest standard: NTA 8828+A1:2019. Furthermore , Normec QS guarantees the quality of PE welding by:
Checking for preparations of welding parameters before the start of the welding process
Control during and after the welding process on site;
Visual examination of test welding and field welding on location and in our own laboratory
Non-destructive testing on site
Destructive testing of test welding and field welding in our own laboratory.
Latest version: NTA 8828+A1:2019
The latest version of the NTA 8828+A1:2019 contains new requirements for making electrofusion weld connections in PE piping systems. Electrofusion welding continues to develop continuously . On the basis of practical experiences in electrofusion welding, an official committee adjusts practical and theoretical regulations. The changes made in 2019 have led to the NTA 8828+A1:2019.
PE welding training
The Normec QS training to become a PE electrofusion welder and to become a welding supervisor are fully recognized bythe latest NTA 8828 guidelines. For example, NTA 8828+A1:2019 has a more extensive training, examination and certification for welders than previous versions of NTA 8828. In the training, attention is paid to some technical changes in the welding method. In addition, more attention is paid to the handling of PE material and equipment.
Certification promotes quality
The introduction of certified welding supervisors aims to contribute to reliable welding connections in the network. Network administrators have been making working with a personal certification in accordance with the NTA 8828+A1:2019 a condition for manufacturing electrical welding for several years.
NTA 8828 standard adapted over the years
The NTA 8828 standard was created by economic operators and stakeholders. This includes pipeline managers, contractors, suppliers and knowledge and inspection bodies. The NTA standard aims to improve the quality and reliability of electrofusion welding connections in improve PE pipes and fittings. The original standard from 1994 was revised for the first time in 2016. With the NTA 8828+A1:2019, the standard has been adapted for the third time to the current conditions and materials used.
Service Overview Normec QS for NTA 8828+A1:2019
Normec QS inspects and tests PE welding. In addition, we train welders and welding supervisors according to the new NTA 8828+A1:2019. This includes the following services:
Inspections of PE pipes according to NTA 8828+A1:2019
Mechanical testing PE electrofusion welds according to NTA 8828+A1:2019
Training, examination and certification of welders according to NTA 8828+A1:2019
Training, examination and certification of welding supervisor according to NTA 8828+A1:2019
Training for PE welding supervisor
The new NTA 8828 has some additions to the training for PE welding supervisor, also known as “LTH’er”. This concerns the extra attention to the way the welder works before, during and after the welding process. This is a central focus of the new NTA 8828+A1:2019 for welding supervisors. At Normec QS , we naturally pay attention to these additions; they are integrated into our training for PE welding supervisor.
Fast delivery of research results
Normec QS makes research results available as soon as possible. In consultation with you, Normec QS determines the delivery time of reports. From 24 hours to a few days, our research results are at your disposal.
Curious what we can do for your company?
These services might also be of interest to you.
Inspection Piping
Mechanical testing
Leading companies in this service
Normec QS
Bennekom Netherlands